8-frame automatic honey extractor for the "RUT" frame, Ø 900 mm. Privi

The automatic 8-frame honey extractor with a worm electric drive is designed to extract bee honey from opened honeycombs under the action of centrifugal force.
The 8-frame automatic honey extractor for the "Ruth" frame consists of:
The rotor of the honey extractor is located at the bottom and is driven into rotation by a belt drive from an electric motor. The electric motor is powered by 12 V DC, and can be powered from a 220 V AC network (for this purpose, a transformer-rectifier is built into the unit body; there is a cord with a plug for connection), or from a 12 V battery (there are 2 terminals with clamps at the bottom of the control unit).
The cassettes with frames are automatically set in the non-working position along the radius to the center and turn when the rotor of the honey extractor rotates in one direction or another, depending on the direction of rotation of the rotor. To set the operating mode of the honey extractor, there is a remote control unit with the appropriate buttons.
Technical data of the honey extractor:
Manual mode of operation of the 8-frame automatic honey extractor.
To operate the honey extractor in manual mode, you must set the switch to the appropriate position and select the operating mode on the control unit (the rotation speed and duration of operation in manual mode must be selected experimentally depending on the density of the honey).
Characteristics of manual mode
VERY IMPORTANT: install the honeycomb frames into the cassettes only when the honey extractor is not in operation!
Honey extractor operation in automatic mode
To operate the honey extractor in automatic mode, you must select one of the programs (P1; P2; P3; P4; P5; P6) on the control panel. The rotation speed, number of turns and pumping time are programmed at the manufacturer and are constant for each program. After the end of rotation in one of the directions, as in manual mode, it is maintained for 22 seconds.
Automatic mode characteristics:
Programs 1-2 consist of two cycles, programs 3-4 of three cycles, and programs 5-6 of four cycles of the honey extractor operation. Each cycle consists of smooth acceleration of the honey extractor rotor to a speed fixed for this cycle with the subsequent time delay according to table 1, smooth braking with a time delay until the rotor stops completely and, if necessary, a transition to the next program cycle - reverse. The acceleration and braking time is not included in the cycle time given in table 1. After starting and during the operation of any program, the "PROGRAM" and "REVERSE" buttons are blocked (not requested). All button presses and the moments of starting and stopping the honey extractor operation are accompanied.
You can buy an Automatic 8-frame honey extractor with a worm electric drive at a favorable price in the beekeeping goods store "UkrPasika" in one click, by placing an order on our website or by calling. We deliver throughout Ukraine.
Motor power supply: DC, 24 V
Motor power: 300 W
Motor shaft speed: 1000 rpm
Number of control programs: 6
Productivity: 104 frames/hour
Weight not more than: 65 kg
Maximum volume of honey before mandatory draining: 50 l
RPM range: 50....160
Operating time, min: 1...5
Direction of rotation: Forward/Reverse
Program: Direction of rotation
Number of cassettes: 8
Frame productivity /g: 104
Tank material: stainless steel (AISI 304)
Cassette material: Stainless steel
Faucet material: Stainless steel
Rotor material: Stainless steel
Electric motor supply current, DC, V: 24
Height (with stand): 1170 mm
Tank height: 710 mm
Width with legs: 1100 mm
Cassette width: 5 cm
Tank diameter: 900 mm
Frame types: Ruth, Shop, Swedish, Bulgarian Shop
brand: ABB-100
Height of the honey extractor with stand: 1170 mm
Useful space for honey: 50 l
engine power: $1kw
Tank with drain tap
Plexiglass cover
Stand
Electric drive
Rotor with cassettes
Control unit