John Deere 8RX 410 crawler tractor


























If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts


- year of manufacture – 2021,
- engine – John Deere – 410 KM,
- engine hours – 2904 hr,
- Powershift – E23 40K, speed 40 km/h,
- CommandCenter 4600, 4.0 – on-board information system – 10,4”, ISOBUS,
- iTEC – implement management system,
- GPS PILOT ready,
- EHR – electrohydraulic rear linkage,
- drive’s seat, active suspension, swivelling, heated and cooled,
- Immobilizer – security lock system,
- Load-Sensing hydraulic system 318 l/min,
- hydraulic brake for trailers,
- PTO – 540 / 1000 rpm,
- bumper hitch, pin D38 mm,
- automatic air-condition,
- refrigerator,
- camera (2x),
- LED work lights,
- radio 6,5” Apple CarPlay,
- rear view mirrors, electric adjustment and heated,
- front tracks – CAMSO 610 mm, 24”,
- rear tracks – CAMSO 760 mm, 30”,
- very good condition
If you have any questions, please don't hesitate to contact us.
Contact person: Dawid show contacts,
show contacts
We offer also worldwide shipping.
Part exchange possible.
- Baujahr – 2021,
- Motor – John Deere – 410 KM,
- Betriebsstunden – 2904 Std.,
- Powershift – E23 40K, Geschwindigkeit 40 km/h,
- CommandCenter 4600, 4.0 – Bord-Informationssystems – 10,4“, ISOBUS,
- iTEC – Vorgewendemanagement,
- GPS PILOT Vorbereitung,
- EHR – Elektrohydraulischer Kraftheber,
- Fahrersitz, aktiv gefedert einschl. Schwenkbar, Sitzheizung und Klimaanlage,
- Wegfahrsperre – Sicherheitsschließsystem,
- Load-Sensing Hydraulik System 318 l/min,
- hydraulische Bremse für Anhänger,
- Zapfwelle – 540 / 1000 U/min,
- Zugpendel, bolzen D38 mm,
- Klimaautomatik,
- Kühlschrank,
- Kamera (2x),
- LED Arbeitsbelachtung,
- Radio 6,5” Apple CarPlay,
- Rückspiegel, elektrisch einstell und beheizbar,
- Raupe vorne – CAMSO 610 mm, 24“,
- Raupe hinten – CAMSO 760 mm, 30“,
- Sehr gute Zustand
Bei Fragen stehen Wir gerne zu Verfugnung.
Kontaktperson: Dawid show contacts,
show contacts
Wir bieten auch Weltweit Transport an.
Können wir auch Ihren Gebrauchtemaschinen in Zahlung nehmen.
- rok produkcji – 2021,
- silnik – John Deere - 410 KM,
- przepracowane – 2904 mth,
- Powershift – E23 40K, prędkość 40 km/h,
- CommandCenter 4600, 4.0 – komputer pokładowy – 10,4”, ISOBUS,
- iTEC – system zarządzania narzędziem na uwrociach,
- przygotowany pod GPS PILOT,
- EHR – elektrohydrauliczne sterowanie podnośnikiem,
- fotel operatora z amortyzacją aktywną, obrotowy z ogrzewaniem oraz wentylacją,
- Immobilizer – zabezpieczenie przeciw kradzieżowe,
- układ hydrauliczny Load-Sensing 318 l/min,
- hamulec hydrauliczny na przyczepy,
- WOM – 540 / 1000 obr/min,
- zaczep belka polowa, sworzeń D38 mm,
- klimatyzacja automatyczna,
- lodówka,
- kamera (2x),
- oświetlenie robocze LED,
- radio 6,5” Apple CarPlay,
- lusterka wsteczne, elektryczna regulacja i podgrzewanie,
- gąsienice przód – CAMSO 610 mm, 24”,
- gąsienice tył – CAMSO 760 mm, 30”,
- stan bardzo dobry
Przyjmujemy maszyny w rozliczeniu.
Oferujemy także transport ponadgabarytowy, koszty transportu ustalane są indywidualnie.
Treść niniejszego ogłoszenia nie stanowi oferty handlowej w rozumieniu art. 66 §1 Kodeksu Cywilnego oraz innych właściwych przepisów prawnych.
Kontakt:
Biuro: show contacts
Dawid Kowalski show contacts
show contacts