New Stiler RĘBAK ROZDRABNIACZ CIĄGNIKOWY 250 MM, TRACTOR DISC WOOD CHIPPER
≈ $8,363
Sokołów Podlaski
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Poland 
Poland, Sokołów Podlaski
Poland, Sokołów Podlaski
Poland, Sokołów Podlaski
Poland, Sokołów Podlaski
Poland, Sokołów Podlaski
Poland, Sokołów Podlaski
Poland, Sokołów Podlaski
Poland, Opalenica
Poland, Opalenica
Poland, Sokołów Podlaski
Poland, Sokołów Podlaski
Poland, Poznań
Poland, Solec-Zdrój
Poland, Poznań
Poland, Podegrodzie
Poland, Słupia
Poland, Słupia
Poland, Słupia
Poland, Słupia
Poland, Słupia
WITH BUILT-IN HYDRAULIC SYSTEM (PUMP AND HYDRAULIC TANK).
Newer reinforced model.
EQUIPPED WITH A NEW GENERATION HYDRAULIC SYSTEM WITH RELIABLE DISTRIBUTORS !!!
4 knives sharpened on both sides ensure very high efficiency and service life of the machine. The blades are made of hard tool steel. The machine has 1 counter blade.
The back of the disc is equipped with breakers and ejection shovels for more efficient ejection of chips from the machine
The machine has two hydraulic pickup rollers. They speed up the work and make it easier to feed the branches onto the shield. In addition, the machine has 10 feeding speeds and a reverse gear for retracting the branches.
The rotation is transmitted through the power take-off shaft which connects the machine directly to the tractor shaft. The minimum required shaft speed is 540 rpm.
The machine is equipped with a three-point linkage system.
The 360° rotating chip ejection allows you to direct the stream in any direction.
Specification:
The material collection system consists of two shafts driven hydraulically by a built-in pump.
The material collection mechanism has a 10-step collection speed regulator and a material dispensing function.
The drive of the hydraulic system comes from the tractor's hydraulic outputs (fastened with quick couplers)
The chipper has a massive disc with a diameter of 940 cm
There are 4 double-sided cutting knives on the disc.
In addition, a counter knife is mounted on the shield cover.
The design of the rotor allows for long-term operation without load on the tractor.
All bearings protected against dust, chipping, etc. are lubricated through easily accessible nipples.
There are also breakers (shovels) on the disc that crush the obtained clearcut to the value of 20-60 mm.
The chipper with a three-point suspension system (TUZ) is designed to work with a farm tractor with a minimum power of 80 HP.
The drive from the tractor to the chipper is transferred by means of a transmission shaft equipped with a safety pin, which is cut off in the event of too much load on the machine and disconnects the direct drive.
The produced chips are thrown through a pipe rotated by 360° in relation to the base of the chipper.
The resulting chip has dimensions from 20mm to 60mm
The set also includes the PTO shaft
Technical data:
Model: BX102R
The size of the shredded material: 25 cm in diameter
Drivetrain: Driven by the tractor's engine via the PTO
Minimum tractor power: 80 hp
Rotor size: 940 cm
Number of cutting knives: 4 + 1 counter blade
Knife type: Hardened CR12 tool steel
Rotor weight: 170 kg
Material feeding mechanism: Built-in pump and tank, two intake rollers
Mounting system: Three-point linkage (TUZ)
Dimensions: 240 cm L x 130 cm W x 285 cm H
Feeding hopper: 92 x 85 cm
Throwing tube rotation range: 360°
Throwing tube height: 285 cm
Rated revolutions per minute/Rated revolutions: 540-1000
Chipper weight: 870 kg